Ryobi RRT18 - Symbols in this Manual; Speed Dial Settings

6
Original Instructions
min
-1
Revolutions or reciprocations per minute
European Conformity Mark
British Conformity Mark
Ukraine Conformity Mark
EurAsian Conformity Mark
Failure to keep long hair away from air
inlet could result in personal injury.
Please read the instructions carefully
before starting the machine.
Wear eye protection
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your local authority or retailer for recycling
advice.
SYMBOLS IN THIS MANUAL
Lock
Unlock
Note
Speed, minimum
Speed, maximum
Off
On
Parts or accessories sold separately
SPEED DIAL SETTINGS
Type of accessory Application Speed
Sanding drums
Sanding wood High
Felt polishing wheels
Polishing and bufng metals, stone, glass and
ceramics
Medium
Wire brush
Brushing metal Medium
Engraving bit
Engraving soft metals Slow
High-speed cutter
Shaping curved surfaces and engraving soft
metals and wood
High
Conical grinding stone
Grinding metal High