Ryobi RRT18 - Page 7

7
Original Instructions
ACCESSORY
Figure Accessory Application
Drum sander mandrel (Ø 6.4 mm)
(Ø 3.2 mm shank/collet)
Attaching to sanding drums
Wrench Removing and inserting accessory bits
Conical grinding stone Grinding metal
6.4 mm Screw mandrel Attaching to polishing wheels
6.4 mm x 12.7 mm sanding drums (60 grit,
120 grit)
used with Drum sander mandrel
Sanding wood
Felt polishing wheels
used with Screw mandrel
Polishing and bufng metals, stone, glass and
ceramics
Polishing compound Polishing and brightening metals and plastics.
Wire brush wheel Brushing metal
0.8 mm engraving bit Engraving soft metals
High-speed engraving cutter
Shaping curved surfaces and engraving soft
metals and wood
Diamond wheel engraving cutter
Cutting and engraving wood, jade, ceramic,
glass, hardened steel and semi-precious stones