EN
ORIGINAL INSTRUCTIONS
Safety, performance, and dependability
have been given top priority in the
design of your screwdriver.
INTENDED USE
The screwdriver is intended to be
used only by adults who have read
and understood the instructions and
warnings in this manual, and can be
considered responsible for their actions.
The product is intended for fastening
and removing screws and bolts.
The product is intended for consumer
use only.
Do not use the product for any other
purpose. Use of the product for
operations diff erent from intended could
result in a hazardous situation.
WARNING! Read all safety
warnings, instructions, illustrations
and specifications provided with
this power tool. Failure to follow all
instructions listed below may result in
electric shock, fi re and/or serious injury.
Save all warnings and instructions
for future reference.
SCREWDRIVER SAFETY
WARNINGS
■ Hold the power tool by insulated
gripping surfaces, when
performing an operation where
the fastener may contact hidden
wiring. Fasteners contacting a “live”
wire may make exposed metal parts
of the power tool “live” and could
give the operator an electric shock.
■ Do not switch on the product again
after it has stalled. Switching it on
again, can cause a kickback with
high reaction force. Determine
why the product has stalled and
rectify it, paying heed to the safety
instructions. If necessary, remove
the insertion tool.
ADDITIONAL SAFETY WARNINGS
■ Clamp workpiece with a clamping
device. Unclamped workpieces can
cause severe injury and damage.
■ Injuries may be caused, or
aggravated, by prolonged use of
a tool. When using any tool for
prolonged periods, ensure you take
regular breaks.
■ Ambient temperature range for tool
during operation is between 0 ˚C
and 40 ˚C.
■ Ambient temperature range for tool
storage is between 0 ˚C and 40 ˚C.
■ The recommended ambient
temperature range for the charging
system during charging is between
10 ˚C and 38 ˚C.
ADDITIONAL BATTERY SAFETY
WARNINGS
■ To reduce the risk of fire, personal
injury, and product damage due to
a short circuit, never immerse your
tool, battery pack, or charger in fluid
or allow fluid to flow inside them.
Corrosive or conductive fluids,
such as seawater, certain industrial
chemicals, and bleach or bleach-
ENGLISH
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL
3
To Next Page
Loading...
