containing products, etc., can cause
a short circuit.
■ Ambient temperature range for
battery during use is between 0°C
and 40°C.
■ Ambient temperature range for
battery storage is between 0°C and
20°C.
TRANSPORTING LITHIUM
BATTERIES
Transport the battery in accordance
with local and national provisions and
regulations.
Follow all special requirements
on packaging and labelling when
transporting batteries by a third party.
Ensure that no batteries can come
in contact with other batteries or
conductive materials while in transport
by protecting exposed connectors with
insulating, non-conductive caps or
tape. Do not transport batteries that
are cracked or leaking. Check with the
forwarding company for further advice.
KNOW YOUR PRODUCT
See page 84.
1. Chuck
2. LED light
3. Forward/Reverse selector
4. On/Off switch trigger
5. Handle, insulated gripping surface
6. LED indicator
7. Battery storage
8. Battery cap
9. Operator’s manual
10. Cross slotted bit
11. USB cable
12. Battery pack
13. USB power adaptor
MAINTENANCE
■ The product should never be
connected to a power supply
when assembling parts, making
adjustments, cleaning, performing
maintenance, or when the product
is not in use. Disconnecting the
product from the power supply will
prevent accidental starting that
could cause serious injury.
■ When servicing, use only original
manufacturer’s replacement parts,
accessories and attachments. Use
of any other parts may create a
hazard or cause product damage.
■ Avoid using solvents when cleaning
plastic parts. Most plastics are
susceptible to various types of
commercial solvents and may be
damaged by their use. Use clean
cloths to remove dirt, carbon dust,
etc.
■ Do not at any time let brake
fluids, gasoline, petroleum-based
products, penetrating oils, etc.,
come in contact with plastic parts.
Chemicals can damage, weaken, or
destroy plastic which may result in
serious personal injury.
■ For greater safety and reliability, all
repairs should be performed by an
authorised service centre.
4
To Next Page
Loading...
