7 English |
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
TROUBLESHOOTING
PROBLEM CAUSE ACTION
Motor does not
run.
The overload protection
device has operated
Wait for the motor to cool, press the
overload protective device reset button.
Turn on the product again.
Power failure Check the power supply cable, the plug
and the house fuse.
Collection bin is not
inserted into the product
and/or safety switch is not
activated.
Insert the collection bin and then pull up
the safety switch to activate it.
Material to be
shredded is not
drawn in
The material is jammed in
the feeding funnel.
Follow instruction in the manual for
clearing obstructions.
Shaving plate is too far from
the cutting means.
Follow instruction in the manual for
shaving plate adjustment.
To Next Page
