EasyManua.ls Logo

Ryobi RY18SPA - LED Indicator Descriptions; Low Battery Indicator; Water Sensor Indicator; Timer Indicator

Ryobi RY18SPA
200 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
7
Original Instructions
LED INDICATOR DESCRIPTIONS
LED indicator Red LED Green LED Status Sound
Low battery
On -
Battery pack capacity is at 25%.
LED light stays on until the
battery pack is discharged.
2 beeps lasting 2 seconds
each every 2 minutes.
Flashing -
Battery pack is in under voltage.
The product will turn o after 2
minutes.
1 beep every 15 seconds.
Water sensor
- On Product is on. -
On -
Product does not detect water.
Put the product under water.
Product will turn o from dry
run protection after 30 seconds.
Product will turn o after 2
minutes.
2 beeps for 2.5 seconds
every after 30 seconds.
Flashing -
Product has an issue. Check the
troubleshooting section. Product
will turn o after 2 minutes.
Constant beeping until
battery pack is removed.
Timer
-
Less than 5 minutes left on
the timer. LED ashes for 15
seconds when timer ends.
Product turns o 15 seconds
after timer ends.
3 beeps lasting 1 second
with 1 minute left on timer.
5 beeps 30 seconds before
timer ends. 3 beeps lasting 1
second when timer ends.
-
Less than 10 minutes left on the
timer. 5-minute timer LED turns
on after 5 minutes.
1 beep on the 10-minute
timer mark.
-
Less than 15 minutes left on the
timer. 10-minute timer LED turns
on after 10 minutes.
1 beep on the 15-minute
timer mark.

Table of Contents

Related product manuals