To Next PageTo Next Page
Need help?Do you have a question about the Ryobi TS1340 and is the answer not in the manual?
General| Type | Table Saw |
|---|---|
| Motor Power | 15 Amp |
| Weight | 54 lb |
| Voltage | 120 V |
| Motor | 15 Amp |
| No-Load Speed | 5000 RPM |
| Blade Diameter | 10 inches |
| Arbor Size | 5/8 inches |
| Bevel Capacity | 0-45 degrees |
| Dust Port | 2-1/2 inches |
Details technical specifications of the miter saw, including blade size, motor rating, and electrical requirements.
Explains safety symbols and pictographs used in the manual and on the product for user awareness.
Describes the double insulation safety feature eliminating the need for grounding.
Covers essential personal safety measures like wearing PPE, proper dress, and securing the work area.
Outlines critical procedures for safe operation, including cord handling, tool usage, and avoiding hazardous situations.
Defines key woodworking terms and concepts relevant to operating the miter saw.
Lists the essential tools required for assembly, adjustments, and blade installation for the miter saw.
Introduces the saw's components and operation before use, emphasizing familiarization.
Covers key features like blade wrench, carrying handle, and locking mechanisms for convenient and safe operation.
Highlights features for precise adjustments, safety, and setup, including stops, guards, mounting, and electrical.
Step-by-step instructions for attaching the miter lock handle to the control arm.
Details how to install the dust guide and dust bag for dust collection.
Explains how to install and use the work clamp for securing workpieces.
Provides detailed, step-by-step instructions for safely installing the saw blade, including warnings.
Detailed steps for aligning the miter table with the fence using a framing square and blade wrench.
Instructions for ensuring the saw blade is perpendicular to the fence, involving adjustments to the fence.
Covers aligning the saw blade with the fence, including loosening screws and checking alignment.
Explains how to reset the scale indicators on the miter and bevel scales after making adjustments.
Details the process of ensuring the saw blade is square to the miter table at 0° and 45°.
Addresses travel pivot and bevel pivot adjustments, recommending service center for issues.
Lists the intended uses of the miter saw, primarily for cutting wood and plastic.
Explains how to perform straight and miter crosscuts using the miter saw, including setup and safety.
Details how to perform bevel cuts by adjusting the saw arm angle and securing it.
Guides on making compound cuts by setting both miter and bevel angles accurately.
Provides instructions and safety tips for supporting long pieces of lumber during cutting operations.
Presents a chart with miter and bevel angle settings for various compound miter cuts.
Explains techniques and settings for accurately cutting crown molding using the miter saw.
Offers advice on positioning and cutting warped material safely to avoid blade binding and kickback.
Provides guidelines for cleaning plastic parts, avoiding chemicals, and maintenance of the tool.
Details proper selection, use, and safety precautions for extension cords with the miter saw.
