To Next PageTo Next Page
Need help?Do you have a question about the Ryobi TS1342L and is the answer not in the manual?
General| Type | Table Saw |
|---|---|
| Voltage | 120 V |
| No-Load Speed | 5000 RPM |
| Blade Size | 10 inch |
| Motor Power | 15 Amps |
| Arbor Size | 5/8 inch |
| Dust Port Size | 2-1/2 inch |
Essential safety guidelines to prevent injury and ensure proper operation of the power tool.
Detailed safety precautions specific to the operation of the compound miter saw.
Concept in safety for electric power tools eliminating the need for a grounded cord.
Guidelines for selecting and using extension cords with power tools to prevent overheating and power loss.
Description of the key components and functionalities of the miter saw.
Technical details and cutting capacities of the compound miter saw.
Identification of included accessories and components with the miter saw.
Instructions for safely removing the saw from its packaging and initial inspection.
Details on securing the miter saw to a workbench using bolts and nuts.
Step-by-step guide for safely installing and removing the saw blade.
Procedure for aligning the laser guide with the workpiece mark for accurate cuts.
How to align the table and blade relative to the fence for precise cuts.
List of common uses for the compound miter saw, including crosscutting and bevel cutting.
Instructions for performing straight and angled cuts across the grain of the workpiece.
Guide for making angled cuts by tilting the saw arm relative to the miter table.
Steps for making cuts with both miter and bevel angles simultaneously.
Techniques for providing additional support for long lumber or moldings during cutting.
Detailed instructions for accurately cutting crown molding using compound angles.
Precautions and techniques for safely cutting warped or bowed workpieces.
How to adjust positive stops for precise miter and bevel angles.
Cleaning and care instructions for the miter saw, avoiding harsh solvents.
Procedure for checking and replacing worn motor brushes.
Steps for replacing batteries in the laser guide unit safely.
Information required when ordering replacement parts for the tool.
