Ryobi TS1345L User Manual

SAVE THIS MANUAL FOR FUTURE REFERENCE
OPERATOR’S MANUAL
10 in. Compound Miter Saw
TS1345L - Double Insulated
Your miter saw has been engineered and manufactured to our high standard for dependability, ease of operation, and
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Thank you for your purchase.
31.6
22.5
22.5
31.6

Ryobi TS1345L Specifications

General

Motor	15 Amp
Table Material	Aluminum
No-Load Speed	5000 RPM
Blade Diameter	10 inches
Arbor Size	5/8 inches
Max Cutting Depth at 90°	3.5 inches
Bevel Capacity	45°
Max Depth of Cut at 90 Degrees	3.5 inches

Summary

General Safety Rules

Specific Safety Rules

Electrical

Features

Tools Needed

Loose Parts

Assembly

Unpacking

Instructions for removing the saw from packaging and initial inspection.

Mounting Holes

Install or Replace the Blade

Detailed steps for safely installing or replacing the saw blade.

Squaring Blade to Fence

How to align the saw blade perpendicular to the fence.

Squaring Blade to Miter Table

Procedure to ensure the blade is square to the miter table.

Operation

Cutting with Your Compound Miter Saw

General guidance and warnings for performing cuts.

To Cross Cut

Instructions for making a cross cut across the workpiece grain.

To Bevel Cut

Steps for making a cut with the blade angled to the workpiece.

To Compound Miter Cut

Guide for performing cuts with both miter and bevel angles simultaneously.

Cutting Compound Miters Chart

Cutting Crown Molding

Laying Molding Flat on Miter Table

Adjustments

Positive Stop Adjustments

Adjust the Laser Guide

Maintenance

General Maintenance

Brush Replacement

Instructions for checking and replacing motor brushes.

Service