To Next PageTo Next Page
Need help?Do you have a question about the Ryobi TS1344L and is the answer not in the manual?
General| Type | Table Saw |
|---|---|
| Blade Diameter | 10 inches |
| Arbor Size | 5/8 inches |
| Motor | 15 Amp |
| No-Load Speed | 5000 RPM |
| Bevel Capacity | 0-45 degrees |
| Dust Port | 2.5 inches |
| Max Depth of Cut at 90 Degrees | 3.5 inches |
Voltage, frequency, and current needs.
Wire gauge and condition for cords.
Labels the main parts and features of the miter saw.
Detailed steps for blade installation or removal.
Procedure for aligning the blade parallel to the fence.
Visual guide to misalignment with the fence.
Procedure for aligning the blade perpendicular to the table.
Crucial safety notes before starting assembly.
Critical safety alerts related to blade handling.
How to adjust the miter fence for alignment.
Visual guide to correct blade alignment with the table.
Steps for setting the bevel angle accurately.
Guidance on attaching the saw to a workbench.
Procedure for calibrating the laser guide for accuracy.
General safety guidelines before and during use.
Instructions for making cuts with both miter and bevel angles.
A reference table for setting compound angles.
Technique for making precise crown molding cuts.
General instructions for performing cuts.
Specific steps for executing bevel cuts.
Specific steps for executing cross cuts.
Warning regarding laser light exposure.
Crucial safety reminder before making adjustments.
