Ryobi TS1342 - User Manual

SAVE THIS MANUAL FOR FUTURE REFERENCE
OPERATOR’S MANUAL
10 in. Compound Miter Saw
TS1342 - Double Insulated
Your miter saw has been engineered and manufactured to our high standard for dependability, ease of operation, and op-
erator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Thank you for your purchase.

Summary

WARRANTY INFORMATION

GENERAL SAFETY RULES

SPECIFIC SAFETY RULES

SERVICE AND SUPPORT

ELECTRICAL GUIDELINES

PRODUCT FEATURES AND SPECIFICATIONS

KEY SAW COMPONENTS

ASSEMBLY AND SETUP

Unpacking and Initial Inspection

Workbench Mounting Instructions

Guidance on securely mounting the miter saw to a workbench for stable operation.

INSTALLING ACCESSORIES

BLADE INSTALLATION AND REPLACEMENT

SQUARING MITER TABLE TO FENCE

SQUARING SAW BLADE TO FENCE

SQUARING BLADE TO MITER TABLE

OPERATING THE COMPOUND MITER SAW

General Cutting Procedures

Provides fundamental steps and warnings for safe and effective cutting operations.

PERFORMING A CROSSCUT

PERFORMING A BEVEL CUT

PERFORMING A COMPOUND MITER CUT

COMPOUND MITER CUTTING CHART

CUTTING CROWN MOLDING

LAYING MOLDING FLAT FOR CUTS

CUTTING WARPED MATERIAL

ADJUSTMENTS AND CALIBRATION

Pivot Adjustments

Depth Stop Adjustments

Explains how to adjust the depth stop for maximum cutting capacity based on blade diameter.

POSITIVE STOP ADJUSTMENTS

MAINTENANCE AND CARE

SERVICE, PARTS, AND MODEL INFORMATION

Service Center Information

Ryobi TS1342 Specifications

General

Table Material	Aluminum
Blade Diameter	10 inches
Arbor Size	5/8 inches
Max Rip Capacity Left	12 inches
Bevel Capacity	0-45 degrees