Ryobi TSS100L User Manual

SAVE THIS MANUAL FOR FUTURE REFERENCE
Your miter saw has been engineered and manufactured to our high standard for dependability, ease of operation, and
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Thank you for purchase.
OPERATOR’S MANUAL
10 in. SLIDING COMPOUND MITER SAW
WITH LASER
TSS100L

Ryobi TSS100L Specifications

General

Brand	Ryobi
Model	TSS100L
Category	Saw
Language	English

Summary

Electrical

Extension Cords

Use only 3-wire extension cords with 3-prong grounding plugs and 3-pole receptacles.

Grounding Instructions

Explains grounding requirements for safety and proper installation.

Electrical Connection

Details connection to a 120V AC, 60Hz power supply for the tool.

Features

Product Specifications

Details technical specifications like blade arbor, diameter, speed, and input voltage.

10 in. Blade

Describes the 10-inch blade and its cutting capacity for wood and plastic.

Bevel Lock Lever

Explains how the bevel lock lever secures the saw arm at desired bevel angles.

Laser Guide

Describes the laser guide for accurate cutting alignment.

Tools Needed

Loose Parts List

Assembly

Unpacking

Instructions for safely removing the saw from its packaging.

Mounting Holes

Details on how to securely mount the saw to a workbench.

Locking / Unlocking the Saw Arm

Procedure for securing and releasing the saw arm for transport or use.

To Install / Replace the Blade

Step-by-step guide for changing the saw blade safely.

Squaring the Blade to the Fence

Procedure to align the saw blade perpendicular to the fence.

Operation

To Miter Cut / Cross Cut

Procedure for performing miter and cross cuts.

To Bevel Cut

Step-by-step guide for making bevel cuts.

To Compound Miter Cut

Guide for performing cuts with both miter and bevel angles.

To Slide Cut

Instructions for performing cuts using the sliding feature.

Adjustments

To Adjust the Bevel Pivot

Procedure for adjusting the smooth pivot movement of the saw arm.

To Adjust the Laser Guide

Steps to align the laser guide for precise cutting.

Depth Stop Adjustments

How to adjust the depth stop for maximum cutting capacity.

Positive Stop Adjustments

Procedure for adjusting positive stops for bevel and miter angles.

Maintenance

Brush Replacement

Guide for checking and replacing worn motor brushes.

Notes