Ryobi TSS121 User Manual

OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
12 in. SLIDING COMPOUND
MITER SAW
SCIE À ONGLETS COMBINÉS
COULISSANTE DE 305 mm (12 po)
SIERRA INGLETEADORA
COMPUESTA DESLIZANTE DE
305 mm (12 pulg.)
TSS121/TSS121T
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
AVERTISSEMENT : Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
TABLE OF CONTENTS
****************
 General Safety Rules .......................2-3
 Miter Saw Safety Rules ...................3-4
 Additional Safety Rules ...................4-5
 Symbols ..............................................6
 Electrical ............................................. 7
 Glossary of Terms ...............................8
 Features .........................................9-13
 Tools Needed ...................................14
 Loose Parts List ................................14
 Assembly .....................................15-24
 Operation .....................................25-35
 Adjustments .....................................36
 Maintenance ................................37-38
 Parts Ordering / Service ..... Back Page
TABLE DES MATIÈRES
****************
 Règles de sécurité générales ..........2-3
 Règles de sécurité scie à onglets ....3-4
 Règles de sécurité supplémentaires ...4-5
 Symboles ............................................6
 Caractéristiques électriques ...............7
 Glossaire .............................................8
 Caractéristiques ............................9-13
 Outils nécessaires ............................14
 Liste des pièces détachées ..............14
 Assemblage .................................15-24
 Utilisation .....................................25-35
 Réglages ...........................................36
 Entretien ......................................37-38
 Commande de pièces /
réparation ..........................Page arrière
ÍNDICE DE CONTENIDO
****************
 Reglas de seguridad generales .......2-3
 Reglas de seguridad sierra
ingleteadora ....................................3-4
Advertencias de seguridad
adicionales ......................................4-5
 Símbolos ............................................6
 Aspectos eléctricos ............................ 7
 Glosario de términos ..........................8
 Características ..............................9-13
 Herramientas necesarias ..................14
 Lista de piezas sueltas .....................14
 Armado ........................................15-24
 Funcionamiento ...........................25-35
 Ajustes ..............................................36
 Mantenimiento .............................37-38
servicio .......................... Pág. posterior

Ryobi TSS121 Specifications

General

Motor Power	15 Amp
Voltage	120V
Motor	Brushless
Cutting Capacity at 90 Degrees	12 inches
Weight	45 lbs
Blade Diameter	12 inches
Arbor Size	1 inch
Power Source	Electric
Max Cutting Depth at 90°	3-1/2 in
Bevel Capacity	45°

Summary

GENERAL SAFETY RULES

Work Area and Electrical Safety

Guidelines for maintaining a safe work environment and proper electrical connections.

Personal Safety and Tool Use

Operator safety, protective equipment, and best practices for power tool operation.

MITER SAW SPECIFIC SAFETY RULES

Miter Saw Operation Safety

Safety precautions unique to the operation and handling of miter saws.

ADDITIONAL SAFETY RULES

Cord Safety and Tool Knowledge

Precautions for extension cords, tool inspection, and understanding the power tool.

SYMBOLS

Signal Words and Meanings

Defines DANGER, WARNING, CAUTION, and NOTICE signal word meanings.

Symbols and Their Meanings

Illustrates and explains common symbols found on the tool and in the manual.

ELECTRICAL

Double Insulation

Explanation of double insulation technology and its safety implications.

Extension Cords

Guidelines for selecting and using appropriate extension cords for safe electrical operation.

GLOSSARY OF TERMS

FEATURES

Product Specifications and Main Components

Details technical specifications and identifies major parts of the miter saw with Fig. 1.

Key Saw Controls and Functions

Explains critical controls like bevel lock, detent override, LED lighting, and carrying handle.

Miter, Fence, and Slide Mechanisms

Covers miter angle settings, sliding features, and the miter fence for precise cuts.

Blade Control and Safety Features

Details the spindle lock button and switch trigger for safe blade operation.

TOOLS NEEDED

ASSEMBLY

Unpacking and Initial Checks

Steps for unpacking, inspecting for damage, and initial setup warnings.

Mounting and Securing the Saw

Instructions for securely mounting the miter saw to a workbench or stand.

Key Assembly Procedures

Instructions for using the depth stop and locking/unlocking the saw arm.

Accessory Installation

Details on installing the dust bag, using the blade wrench, and the work clamp.

Blade and Throat Plate Handling

Procedure for installing/replacing the blade and managing the throat plate.

Alignment and Calibration

Steps to ensure the blade is properly squared to the fence and miter table.

OPERATION

General Safety and Applications

General safety warnings and intended applications for the miter saw.

Cutting with Your Saw

Basic operation steps and safety precautions for cutting with the compound miter saw.

Making Specific Cuts

Instructions for performing non-sliding, miter, and cross cuts.

Bevel and Compound Cuts

Detailed procedures for making bevel and compound miter cuts.

Supporting Workpieces and Slide Cuts

Methods for supporting long workpieces and performing slide cuts.

Specialty Cuts: Crown Molding

Techniques for accurately cutting crown molding using specific miter and bevel angles.

Warped Material and Wide Workpieces

Guidelines for cutting warped material and clamping wide workpieces.

ADJUSTMENTS

Positive Stop Adjustments

How to adjust positive stops for miter and bevel angles for accurate settings.

MAINTENANCE

General Maintenance and Lubrication

Advice on cleaning, avoiding solvents, and lubrication for the saw.

Brush Replacement

Steps for checking and replacing worn motor brushes.

Cleaning the LED Lens

Instructions for cleaning the LED lens to ensure visibility for precision cuts.