Ryobi TSS702 - User Manual

OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
7-1/4 in. SLIDING COMPOUND
MITER SAW WITH LED
SCIE À ONGLETS COMBINÉS
COULISSANTE AVEC DEL
DE 184 mm (7-1/4 po)
SIERRA INGLETEADORA
COMPUESTA DESLIZANTE CON DIODO
DE 184 mm (7-1/4 pulg.)
TSS702
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
AVERTISSEMENT : Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
TABLE OF CONTENTS
****************
 General Safety Rules .......................2-3
 Miter Saw Specific Safety Rules .....3-4
 Additional Safety Rules ...................4-5
 Symbols ..............................................6
 Electrical ............................................. 7
 Glossary of Terms ..............................8
 Features .........................................9-11
 Tools Needed ...................................12
 Loose Parts List ................................12
 Assembly .....................................13-20
 Operation .....................................21-31
 Adjustments .....................................32
 Maintenance ................................33-34
 Parts Ordering/Service ........Back page
TABLE DES MATIÈRES
****************
 Règles de sécurité générales ..........2-3
 Règles de sécurité du scie
à onlgets .........................................3-4
 Règles de sécurité suplémentaires ..4-5
 Symboles ............................................6
 Caractéristiques électriques ...............7
 Glossaire ............................................8
 Caractéristiques ............................9-11
 Outils nécessaires ...........................12
 Pièces détachées .............................12
 Assemblage .................................13-20
 Utilisation .....................................21-32
 Réglages ...........................................33
 Entretien ......................................34-35
 Commande de pièces/
réparation ..........................páge arrière
ÍNDICE DE CONTENIDO
****************
Reglas de seguridad generales .......2-3
Reglas de seguridad sierra
ingleteadora ....................................3-4
Advertencias de seguridad
adicionales ......................................4-5
Símbolos ............................................6
Aspectos eléctricos ............................ 7
Glosario de términos ..........................8
Características ..............................9-11
Herramientas necesarias ..................12
Lista de piezas sueltas .....................12
Armado ........................................13-20
Funcionamiento ...........................21-32
Ajustes ..............................................33
Mantenimiento .............................34-35
Pedidos de piezas/
servicio .......................... pág. posterior

Summary

General Safety Rules

Work Area, Electrical, and Personal Safety

Covers safety for the work area, electrical connections, and personal well-being.

Power Tool Use and Care

Guidelines for operating and maintaining the power tool safely.

Miter Saw Specific Safety Rules

Additional Safety Rules

Electrical

Double Insulation

Electrical Connection

Extension Cords

Features

Know Your Compound Miter Saw

LED Lighting, Fences, and Scales

Assembly

Unpacking and Initial Setup

Mounting and Depth Adjustment

Details saw mounting and depth stop usage.

Locking;Unlocking the Saw Arm

To Install;Replace the Blade

Step-by-step guide for installing or replacing the saw blade.

Squaring the Blade to the Fence

Procedure for aligning the blade perpendicular to the fence.

Blade-to-Fence Alignment Adjustments

Adjustments for ensuring blade parallelism with the fence.

Squaring the Blade to the Miter Table

Procedure for aligning the blade perpendicular to the miter table.

Operation

Cutting with Your Compound Miter Saw

General safety and procedures for cutting with the saw.

LED Lighting System

To Miter Cut;Cross Cut

Steps for making miter and cross cuts.

Miter Cut

To Bevel Cut

To Compound Miter Cut

Steps for performing compound miter cuts.

To Slide Cut

Slide Cut

Making an Auxiliary Fence

Cutting Compound Miters

Cutting Crown Molding

Laying Molding Flat on the Miter Table

Nesting Crown Molding Against the Miter Fence

Vertically Cutting Base Molding Against the Miter Fence

Cutting Warped Material

Adjustments

Positive Stop and Pivot Adjustments

Covers adjustments for positive stops, pivots, and arm travel.

Maintenance

Brush Replacement

Step-by-step guide for replacing motor brushes.

Ryobi TSS702 Specifications

General

Type	Sliding Compound Miter Saw
Voltage	120V
Weight	23 lbs
Arbor Size	5/8 inches
Power Source	Corded
Dust Port	Yes
Blade Diameter	7-1/4 in
Max Cutting Depth at 90°	2 in