Ryobi TS230 User Manual

45
30
15
0
45
D
A
N
G
E
R
K
E
E
P
H
A
N
D
S
A
W
A
Y
F
R
O
M
B
L
A
D
E
45
40
20
10
0
30
10
20
0
SAVE THIS MANUAL FOR FUTURE REFERENCE
OPERATOR'S MANUAL
10 in. (254 mm) Compound Miter Saw
Model TS230 - Double Insulated
THANK YOU FOR BUYING A RYOBI COMPOUND MITER SAW.
Your new saw has been engineered and manufactured to Ryobi's high standards for dependability, ease of operation, and
operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
CAUTION: Carefully read through this entire operator's manual before using your new saw.
Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your saw properly and only for what
it is intended, you will enjoy years of safe, reliable service.
Please fill out and return the Warranty Service Registration Card so we can be of future service to you.
Thank you again for buying Ryobi tools.

Ryobi TS230 Specifications

General

Brand	Ryobi
Model	TS230
Category	Saw
Language	English

Summary

RULES FOR SAFE OPERATION

SAFETY ALERT SYMBOL EXPLANATION

Explains the universal safety alert symbol used for warnings and cautions.

DANGER WARNING LEVEL DEFINITION

Defines the 'DANGER' warning level indicating potential for serious injury or death.

WARNING LEVEL DEFINITION

Defines the 'WARNING' level for potential serious injury or hazards.

CAUTION LEVEL DEFINITION

Defines the 'CAUTION' level for potential property damage or minor injury.

ADDITIONAL SAFETY RULES FOR COMPOUND MITER SAWS

UNPACKING AND CONTENTS VERIFICATION

LIST OF LOOSE PARTS

ASSEMBLY INSTRUCTIONS

ADJUSTMENTS AND ALIGNMENT

CUTTING ZERO CLEARANCE THROAT PLATE SLOT

ALIGNING MITER TABLE TO FENCE

Instructions to align the miter table perpendicular to the fence for square cuts.

ALIGNING SAW BLADE TO FENCE

Procedures to ensure the saw blade is parallel to the fence for accurate miters.

ALIGNING BLADE TO MITER TABLE

Steps to make the saw blade perpendicular to the miter table for square bevels.

PIVOT AND DEPTH STOP ADJUSTMENTS

OPERATION

GENERAL CUTTING PROCEDURES

Covers general cutting, crosscutting, and safety during operation.

BEVEL CUTTING PROCEDURE

COMPOUND MITER CUTTING

Instructions for making cuts with both miter and bevel angles simultaneously.

COMPOUND MITER SETTINGS CHART

CROWN MOLDING CUTTING

WARPED MATERIAL AND CLAMPING

MAINTENANCE AND SERVICE

EXTENSION CORD USAGE GUIDELINES

BRUSH REPLACEMENT PROCEDURE

TROUBLESHOOTING