Preliminary manual AN 401 Plus V2 r12 25/10/12
Changes between V 2.11 and V 2.12 versions:
Page 7, instrument’s power supply (2.2.1)
Page 9, electrical connection table (2.7)
Page 13, RS485 connections (2.15), with serial connection default table
Page 21, DAC settings flow chart
Page 22, Modbus baud rate
Z:\Manuali\Pitagora (AN401)\Pitagora UK\AN401plus_uk_V2r12_251012.doc
Notice: The information in this manual is subject to change without notice. S2Tech shall not
be liable for technical or editorial errors or omissions contained herein, nor for incidental or
consequential damages resulting from the furnishing, performance, or use of this material. This
manual contains information protected by copyright.
No part of this manual may be photocopied, or reproduced in any form, or translated without prior
written consent from S2Tech.