S2Tech DS EUROPE AN-401plus Series User Manual

DS EUROPE by S2Tech
T R A N S D U C E R S A N D I N D U S T R I A L E L E C T R O N I C S
MICROPROCESSOR
PANEL METER
SERIE AN-401plus
Version 2 Rev. 12
25/10/2012
TECHNICAL
MANUAL

S2Tech DS EUROPE AN-401plus Series Specifications

General

Brand	S2Tech
Model	DS EUROPE AN-401plus Series
Category	Measuring Instruments
Language	English

Summary

Electrical Connection

Rear Terminal Connections

Details the physical layout of rear terminal connections for various modules.

Power Supply Connection

Explains how to connect the power supply to the instrument.

Input Card I1: 0 to ±80 mV Differential Signal

Input Card I4: ±10 V Amplified Signal

Input Card I6: 4-20 mA or 0-20 mA Current Loop

Output Cards O1/O2: 0-5V and 0-10V Analog

Output Cards O3/O4: 4-20 mA and 0-20 mA Analog

Serial Port RS-232 (DB-9) Connection

Details the wiring and connection for the RS-232 serial port.

Serial Port RS-485 (RJ-11b) Connection

Explains the connection for the RS-485 serial port.

Instrument Setup

How to Set Parameters

Describes the general sequence for setting instrument parameters and values.

Operating Parameter Setting

Analog Output Setting

Serial Connection Setting

Measurement Functions

Peak Function

Describes how to store and display the maximum value reached by the transducer signal.

Hold Function

Protection Feature

DSENET Serial Protocol

"R" Command for Data Request