Saab 9000 - Page 168

Diagnostic trouble code P0335 (contd.)
3
~)
3 Check the crankshaft position sensor's
ground and screen connections
- Connect the test lamp to:
• Battery positive (B+) and pin 2 of the
connector.
• Battery positive (B+) and pin 3 of the
connector.
Does the test lamp light up in both cases?
I YES I Continue with point 4.
I NO I Repair or replace the appropriate lead be-
tween:
• pin 2 and crimped connection J68
• pin 3 and crimped connection J68 ..
Then continue with point 5.
Saab 9000
Fault diagnosis 165
I