Fault criteria for catalyst
damaging misfire fulfilled
CHECK-ENGINE
light blinks at 1 Hz, fault code
is set.
In case of low fuel level a
code is set for this as well.
Catalyst damaging misfire
stops.
CHECK-ENGINE light
on steady.
Catalyst damaging misfire
does not occur in 3
con-
secutive
driving cycles
with similar conditions as
when the fault first oc-
curred.
CHECK~ENGINE
light
off.
E
,
C.E. 1
Hz
OTC
ON
,
OK
I
C.E.
ON
,
3DCY
OK
~
C.E.
OFF
Technical Description
0-
F
Fault code erased.
f-------o,
40WUC
OK
II
&
,)
Saab9000
'---
Catalyst damaging misfire
does not occur in 40 warm up
cycles.
and
67
I