R5 SUPREME - Navigation System
OPERATION
7000 118-301, A Page 76
Figure 48 – Sail To View
Either an existing waypoint can be used, or a new destination waypoint can be
created. The new waypoint can be created by either specifying latitude and
longitude or by specifying range and bearing from current position. To select or
create a destination, press the button ―Select DEST‖. The Insert Waypoints view will
be shown.
Figure 49 – Insert Waypoints View
Choose an existing waypoint
1. Select a waypoint in the list; it will be highlighted when selected.
2. Press the button ―Select Waypoint‖ to transfer the waypoint to the ―Insert
List‖ to the right.
3. Press ―Insert‖ to choose the waypoint as destination in the Sail To view.
4. Press ―Sail‖ in the Sail To view to start sailing towards the chosen
destination.
Create a new waypoint by specifying latitude and longitude
1. Press the button ―Create New WPT‖ to show the Create New Waypoint view.
2. Press on the ―Name‖ edit field and enter a new name for the destination.
3. Press the ―LAT‖ edit field to input latitude.
4. Press the ―LON‖ edit field to input longitude.
5. Press ―Save‖ to choose the new waypoint as destination in the Sail To view.
To Next Page
