Saba LV10C44MINI-PLIX - Error Codes; Possible Causes; The Dishwasher

Problem Possible Causes What to Do
Unsatisfactory drying
result
The dishes are not drying Improper loading Load the dishwasher as
suggested in the direc-
tions.
Too little rinse-aid Increase the amount of
rinse-aid/rell the rinse-
aid dispenser.
Dishes are removed too
soon
Do not empty your
dishwasher immediately
after washing. Open the
door slightly so that the
steam can escape. Begin
unloading the dishwasher
only once the dishes are
barely warm to the touch.
Empty the low basket
rst. This prevents water
from dropping o dishes
in the upper basket.
Wrong program has
been selected
In short program the
washing temperature is
lower. This also lowers
cleaning performance.
Choose a program with a
long washing time.
Use of cutlery with a
low-quality coating
Water drainage is more
dicult with these items.
Cutlery or dishes of this
type are not suitable
for washing in the dish-
washer.
Error Codes
When some malfunctions come on, the appliance will display
error codes to warn you:
Codes Meanings Possible Causes
E1 Longer inlet time. Faucets are not opened, or water
intake is restricted, or water pres-
sure is too low.
E4 Overow. Some element of dishwasher
leaks.
E8 Divider vale failed Divider vale failed
WARNING!
• If overow occurs, turn o the main water supply before
calling a service.
• If there is water in the base pan because of an overll or
small leak, the water should be removed before restarting
the dishwasher.
111110
GB
GB