Please follow the steps below for
adjustment in salt consumption�
1� Unscrew the cap from the salt
container�
2� There is a ring on the container with
an arrow on it (see gure on the side),
if necessary, rotate the ring in the
anticlockwise direction from the “-”
Setting toward the “+” sign, based on
the hardness of the water being used�
It is recommended that adjustments
should be made in accordance with
the following scheme:
WATER HARDNESS
Selector
Position
Salt
consumption
(gram/cycle)
Auto nomy
(cycles/1 kgs)
ºdH ºfH ºClarke mmol/l
0-8 0-14 0-10 0-1�4 / 0 /
8-22 14-39 10-28 1�4-3�9 - 20 50
22-45 39-80 28-56 3�9-8 Mid 40 25
45-60 80-107 56-75 8-11 + 60 16
Note:1
1°dH = 1�25°Clarke=1�78°fH=0�178mmol/l
°DH: German degree
°fH: French degree
°Clark: British degree
Note:2
“/" No salt need added
"-" Setting toward the "-" sign
"+" Setting toward the "+" sign
"Mid" Setting toward between the "-" sign and "+" sign
Contact your local water board for information on the hardness of
your water supply�
NOTE: If your model does not have any water softener, you
may skip this section�
WATER SOFTENER
The hardness of the water varies from place to place� If hard
water is used in the dishwasher, deposits will form on the dishes
and utensils�
The appliance is equipped with a special softener that uses a salt
container specically designed to eliminate lime and minerals
from the water�
7574
To Next Page
Loading...
