Saba LVSL4915X - 2. Quick operation guide; Initial Operation Steps

• The door must not be left open as this presents a risk of
tipping�
• If the power cable is damaged, it must be replaced by
the manufacturer, their after-sales service or a qualied
professional in order to avoid any danger�
• Appliances are not intended to be operated by means of an
external timer or separate remote-control system�
• The connection may be achieved by having the plug accessible
or by incorporating a switch in the xed wiring in accordance
with the wiring rules�
• Concerning the information relative to the installation,
handling, maintenance and disposal of the appliance, please
refer to the following paragraph in the manual�
• For installation and connection, please refer to chapters:
page104-106 and “CONNECTION” page 106-108�
• For maintenance, please refer to chapter: “MAINTENANCE
ANDCLEANING” appliance “INSTALLATION” pages 97-102�
The maximum number of place settings to be washed: 9�
The minimum inlet water pressure is 0,04 MPa�
The maximum inlet water pressure is 1MPa�
Concerning <how to load the dishwasher>, please refer to the
chapter <Loading the Dishwasher Baskets> page 84-88�
2. Quick operation guide
For detailed operating method read the corresponding content
onthe instruction manual�
Switch on the
appliance
Press the On/O button to switch on the
appliance, Open the door�
Fill the detergent
dispenser
Compartment A:
With each wash cycle�
Compartment B:
For programmes with
pre-wash only�
(Follow the user
instructions!)
Check the rinse
aid level
Mechanical indicator C.
Electric indicator on control panel
(ifprovided)�
6766
GB GB