8. Installation instruction
Positioning the Appliance
Position the appliance in the desired location� The back should
rest against the wall behind it, and the sides, along the adjacent
cabinets or walls� The dishwasher is equipped with water supply
and drain hoses that can be positioned either to the right or the
left sides to facilitate proper installation�
About Power Connection
WARNING!
For personal safety:
• DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH
THIS APPLIANCE�
• DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE
EARTHING CONNECTION FROM THE POWER CORD�
Levelling the Appliance
Once the appliance is positioned for
levelling, the height of the dishwasher may
be altered via adjustment of the screwing
level of the feet� In any case,the appliance
should not be inclined more than 2°�
Electrical Connection
Ensure the voltage and frequency of
the power being corresponds to those
on the rating plate� Only insert the plug
into an electrical socket which is earthed
properly� If the electrical socket to which
the appliance must be connected is not
appropriate for the plug , replace the socket,
rather than using a adaptors or the like as
they could cause overheating and burns�
Insure
proper ground
exists before use
Electrical Requirements
Please look at the rating label to know the rating voltage and connect
the dishwasher to the appropriate power supply� Use the required
fuse 10 amp, time delay fuse or circuit breaker recommended and
provide separate circuit serving only this appliance�
GROUNDING INSTRUCTIONS
• This appliance must be earthed� In the event of a malfunction
or breakdown, earthing will reduce the risk of electric shock
by providing a path of least resistance for the electric current�
This appliance is equipped with a cord having an equipment-
earthing conductor and an earthing plug� The plug must be
plugged into an appropriate outlet that is installed and earthed
in accordance with all local standards and requirements�
105104
To Next Page
Loading...
