Saba LVSL4915X - 7. Maintenance and Cleaning; Filtering System

4� Add forgotten dishes�
5� Close the door
6� Press the start/reset button, the dishwasher will run after
10seconds�
At the End of the Wash Cycle
When the working cycle has nished, the buzzer of the
dishwasher will sound for 8 times, then stop� Turn o the
appliance using the ON/OFF button, shut o the water supply and
open the door of the dishwasher�
Wait for a few minutes before unloading the dishwasher to avoid
handling the dishes and utensils while they are still hot and more
susceptible to breakage� They will also dry better�
• Switch O the Dishwasher
The program light is o, only in this case the programme has
ended �
1� Switch o the dishwasher by pressing the ON/OFF button�
2� Turn o the water tap!
• Open the door carefully�
Hot dishes are sensitive to knocks� The dishes should therefore
be allowed to cool down around 15 minutes before removing
from the appliance�
Open the dishwasher’s door, leave it ajar and wait a few
minutes before removing the dishes� In this way they will be
cooler and the drying will be improved�
7. Maintenance and Cleaning
Filtering System
The lter prevents larger remnants of food or other objects from
getting inside the pump� This residue can occasionally clog up the
lters�
The lter system consists of a coarse lter, a at (Main lter)And
a microlter (Fine lter)�
• Unloading the dishwasher
It is normal that the dishwasher is wet inside�
Empty the lower basket rst and then the upper one� This will
avoid water dripping from the upper Basket onto the dishes in
the lower one�
WARNING!
It is dangerous to open the door when washing, because the hot
water may scald you�
9796
GB GB