Saba LVSL4915X - Cleaning the Spray Arms

Cleaning the Spray Arms
It is necessary to clean the spray arms
regularly for hard water chemicals will
clog the spray arm jets and bearings�
To remove the upper spray arm, screw o
the nut clockwise then remove the arm�
To remove the lower spray arm, pull out
the spray arm upward�
Wash the arms in soapy and warm water and use a soft brush to
clean the jets� Replace them after rinsing them thoroughly�
UNSCREW
PULL OUT
How to Keep Your Dishwasher in Shape
• After Every Wash
After every wash, turn o the water supply to the appliance
and leave the door slightly ajar so that moisture and odors are
not trapped inside�
• Remove the Plug
Before cleaning or performing maintenance, always remove
the plug from the socket� Do not run risks�
• No Solvents or Abrasive Cleaning
To clean the exterior and rubber parts of the dishwasher,
donot use solvents or abrasive cleaning products�
Rather, use only a cloth and warm soapy water� To remove
spots or stains from the surface of the interior, use a cloth
dampened with water and a little white vinegar, ora cleaning
product made specically for dishwashers�
• When You Go on Holiday
When you go on holiday, it is recommended that you run a
wash cycle with the dishwasher empty and then remove the
plug from the socket, turn o the water supply and leave the
door of the appliance slightly ajar� This will help the seals last
longer and prevent odors from forming within the appliance�
• Moving the Appliance
If the appliance must be moved, try to keep it in the vertical
position� If absolutely necessary, it can be positioned on its back�
• Seals
One of the factors that cause odors to form in the dishwasher is
food that remains trapped in the seals� Periodic cleaning with
a damp sponge will prevent this from occurring�
103102
GB GB