EasyManua.ls Logo

Saba OMP7324BL/A - Page 46

Saba OMP7324BL/A
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB GB
89
88
Note:
1. Normal function cooking time setting range is 0 minute to 10
hours. When the cooking time is not set, the oven will default to
maximum time of 10 hours.
2. Long press “+/-” to increase/ decrease by 5 min, and short
press “+/-” to increase/ decrease by 1 min.
5. Reservation function
5.1: When the function is selected and pressswitch knob key to
set the temperature,touch “ ” key 3 times to set the working
time, then re-press “ ” to enter the cooking reservation function
setting, the timer enter the following icon and flashes:
5.2: During working status, touch the “ ”4 times to enter the
cooking reservation function setting, the timer enters the
following icon and flashes:
Set the reservation start time through the “+”and “-”keys. After
the setting, press the “ ” to confirm and the oven enters the
reservation status. The reservation function icon always light up
and displays the system time(See Figure 9); the temperature
position shows the reservation set temperature.
After all setting is completed, pls always press switch
knob to start the oven.
The maximum reservation time is set at 23 hours and 59
minutes.
All heating tubes and motors have no output in the reservation
state.
The reservation set time is the oven starts working time
After the reservation time is set, if there is no operation within
10 seconds, the oven will automatically confirm and enter the
reservation status.
When the oven under the reservation function,you can touch
bottom ” ” four times to checkthe cooking beginning time.
6. Pyrolytic self-cleaning mode
You can switch to pyrolytic self-cleaning modeby rotating
programming switch knob.The default temperature of this mode
is not adjustable, default working time is 2.5 hours. You can
touch “ ” 3 times to adjust the working time, adjustable
working time range is min. 1.5 hours and max. 2.5 hours.
After selecting the pyrolytic self-cleaning mode and setting
working time, touch “Switch know” to start working. At this time,
temperature position “PYR”icon will display, door lock will be
activated, door lock icon “ ” will always display, indicating
that the oven door has been locked and pyrolytic self-cleaning
Pic 8:Reservation function setting
Pic 9:Reservation status display effect
temperature position “PYR”icon will display, door lock will be
activated, door lock icon “ ” will always display, indicating

Related product manuals