Sachs SA 280A - Fig; Detach Starter Cord from Pulley; Assembly Fig; Note

F&S 430 ; 124
Fig. 32
F &S 43 0:125
Fi g. 33
F&s 4 30 ,1 26
Fi g. 34
22
Fi g. 32
Care f ull y take out the pulley,
taking care that the coil spring
un der it does not jump out.
Detach
starter cord from pul ley.
Take out
spacer ring (n ) and
ring (g).
Fi g. 33
The be st way to take out the coil
spri ng is to strike the star ter
hou sing with the ope n side
downwards on the work bench.
Brake t he ejecting coil spring
with the s tarter housing .
No te :
If the sta rting disc must be re-
placed or inse rted for the other
starti ng di rect io n h eat the bush
well, l
et it co ol and then re move it.
Assembly
Fi g. 34
Fit the st arting disc so that the
bent -up clip (h) lie s in the star t-
ing direction s hortly after inse rt -
in g the sp ring , and the recesses
(x) clip into pl ac e in the cor res-
pond ing r ib on the bottom of the
st
art er housing.
Pr
ess bush up again st stop (u se
on ly new bush es ).