Sachs SA 280A - Page 37

c
Note:
Fig. 53
The contact-breaker hub of mag-
neto flywheel with screwed in
contact-brea ' ker hub must be so
positioned that the mark "L" on
anti-clockwise rotating magneto
flywheel and the mark "R " on
clockwise rot ating magneto fly -
wheel is lin ed up with the hole
marked "RL" in th e magneto
housing.
Fi g. 54
Take care when fit ting magneto
flywheel on to keyway that the
grooves marked "R" and " L" en-
gage correctly, i. e. use groove
marked " L" for magn e to fly-
wheel rotating anti-clockwise.
Fig. 53
Fig.
54
35