SaeboStim Pro
Powering the Device
Slide the toggle switch on the right side
of the device to turn on the stimulator. The screen will show all of the icons
for 2 seconds before transitioning to the start screen. See Figures 11 & 12.
Place the Electrode Pads on the precise
skin location by applying the center of
theElectroderstandsmoothingdown
the edges. The complete surface of the
Electrodes should be in contact with the
skin. See Figure 10.
Figure 11 Figure 12
Figure 10
On/O
28
To Next Page
Loading...
