Saebo SaeboStim Pro - Page 34

SaeboStim Pro
Trigger Mode
The Trigger Mode is possible in Programs
1, 2, 4, 6, 7, and 9. To activate, select the
desired Channel by pressing the Channel
Key (i.e., Ch A or Ch B), so “A” or “B” is
ashing.See Figure 21. When the selected
Channelisashing,pressthePause/Trigger
Key (T) and hold for 3 seconds to activate
the Trigger Mode. See Figure 22.
An “arrow” symbol will appear below the
corresponding Channel. See Figure 23.
When pressing the “T” key, the stimulator
enters a contraction cycle for as long as the
key is pressed. When the key is released the
stimulatoriso.Duringthelengthofthe
Trigger Mode session, the corresponding
Channelwillcontinuetoashandthearrow
symbol will remain visible.
Figure 21
Channel Key
Figure 22
Pause/Trigger
Key
Figure 23
32