Saebo SaeboStim Pro - Care and Maintenance; Device Storage and Cleaning; Electrode Pad Maintenance; Battery Replacement Procedure

SaeboStim Pro
Toeectivelyperformsensoryelectricalstimulation,conductivegarmentsandlotion
will be required. They are NOT included with this device. To purchase, contact your
Saebo representative for details.
Loose Electrode Indication
The SaeboStim Pro monitors the connection between
the Electrode Pads and the user. When the Electrodes
Pads exhibit a poor connection, the treatment will be
paused and an audible beep will emit from the unit. The
Warning symbol will display on the screen.
See Figure 32.
The user should check and reconnect the Electrode Pads
or ensure good skin contact is present. The intensity
level will be reset to zero requiring the user to press the
intensity increase button to return to the desired level.
Figure 32
Treatment Completion
When the treatment is complete, the stimulation will stop automatically. At this stage,
theunitshouldbeturnedoandalloftheElectrodePadscansafelyberemoved
fromtheskinbypeelingtheedge.PlaceElectrodePadsonlmandstoreina
protective sleeve for future use.
Note:Theunitwillpoweroautomaticallyafter15minutes.
Helpful Hint: Patients with sensory loss should not over-stimulate.
Consult your health professional for proper setup and protocol.
37