63
ENGLISH
63
To perform the descaling cycle, follow the steps below:
Before descaling:
1
1 - Raise the co ee dispensing spout;
2 - Press the side buttons;
3 - Remove and empty the drip tray and the co ee grounds drawer;
then place them back.
3
1
2
2
2
Fill the milk carafe with water up to the MIN level and insert it into the
machine.
Yellow
3
Press the “ ” button until the following display is shown.
4
Press the “ ” button to start the descaling process.
Yellow
5
The machine reminds you to insert the carafe and remove the milk
carafe dispenser by showing the following icons.
Note:
If you press the “
” button by mistake, press the “ ” button to quit.
YellowYellowYellow
To Next Page
Loading...
