64
ENGLISH
7
Pour all the descaling solution into the water tank. Then ll the water
tank with fresh water up to the CALC CLEAN level.
8
Put the water tank back into the machine.
10
Press the “ ” button to start the descaling cycle.
Yellow
11
The machine will start dispensing the descaling solution at intervals.
The bar on the control panel shows the cycle progress.
9
Pull out the milk carafe dispenser to the right up to the “ ” icon.
Place a large container (1.5l) under both the milk carafe dispenser and
the co ee dispensing spout.
6
Remove the “INTENZA+” water lter (if any) from the water tank and
replace it with the small white original one.
Yellow
To Next Page
Loading...
