15
ENGLISH
15
Automatic Rinse/Cleaning Cycle
When warm-up has been completed, the machine automatically performs
a rinse/self-cleaning cycle of the internal circuits with fresh water. This
takes less than a minute.
1
Place a container under the co ee dispensing spout to catch the small
amount of water which will be dispensed.
2
The machine shows this display. Wait for the cycle to nish automati-
cally.
Note:
You can stop dispensing by pressing the “
” button.
Yellow
Green
3
When the operations described above have been completed, the ma-
chine shows this display. You can now perform the manual rinse cycle.
Manual Rinse Cycle
During this process you activate the co ee brewing cycle and fresh water
ows through the water circuit. This takes a few minutes.
1
Place a container under the co ee dispensing spout.
To Next Page
Loading...
