33
ENGLISH
33
3
To remove the brew group, press the «PUSH» button and pull it by the
handle.
5
Thoroughly wash the brew group with fresh, lukewarm water and
carefully clean the upper lter.
Caution:
Do not use detergent/soap to clean the brew group.
6
Let the brew group air-dry thoroughly.
7
Thoroughly clean the inside of the machine using a soft, dampened
cloth.
8
Make sure the brew group is in the rest position; the two reference
signs must match. If they do no match, proceed as described in steps
9-10.
4
Remove the co ee residues drawer and wash it thoroughly.
9
Gently pull down the lever until it is in contact with the brew group
base and the two reference signs on the side of the brew group do
match.
To Next Page
Loading...
