52
ENGLISH
Ready Signals (Green Colour)
Co ee brewing using pre-ground co ee in progress.
Warning Signals (Yellow Colour)
The machine is heating-up to brew beverages or dispense hot water/steam.
The machine performs the rinsing cycle. Wait until the machine has comple-
ted the cycle.
The machine needs the “INTENZA+” water lter to be replaced.
The brew group is being reset due to machine reset.
Re ll the co ee bean hopper with co ee beans.
Prime the circuit.
The machine needs to be descaled. Press the “ ” button to start the de-
scaling process. Follow the steps described in the “Descaling” chapter of this
manual.
If you want to descale later, press the
“ ” button to continue using the
machine.
Please note that not descaling your machine will ultimately make it stop wor-
king properly. In this case repair is NOT covered under your warranty.
To Next Page
Loading...
