US English
12
105
12 STORAGE - DISPOSAL
12.1 Location Change
Should the machine be placed in a different location, it is
necessary to:
• disconnect the appliance from the supply network;
• carry out the general cleaning of the appliance as indicated
in chapter "Cleaning and Maintenance";
• put the parts back into place and close the doors;
• lift and place the appliance in the assigned location
following the instructions given in section "Unpacking and
Positioning".
12.2 Inactivity and Storage
If the appliance needs to be stored or remains inactive for
a long period, carry out the same operations as described
in section "Location Change", therefore:
• wrap the appliance with a cloth to protect it from dust
and humidity;
• make sure that the appliance is installed in a suitable place
(temperature must be lower than 1°C) and be careful not
to put cartons or appliances on it.
To Next Page
Loading...
Need help?
General
