US English
2
11
2 INFORMATION ABOUT THE APPLIANCE
2.1 Information for the
Maintenance Technician
The appliance must be
installed in a well-lit,
sheltered and dry place
and on a table suitable to
bear its weight.
To ensure its correct operation and reliability over time,
comply with the following recommendations:
• ambient temperature: from +2°C to +32°C;
• maximum humidity allowed: 80% (non-condensed).
For special installations, not covered by this manual, please
contact the dealer or the local importer. If this is not
possible, please contact the Manufacturer.
The technical service is available for any explanation or
information regarding the correct operation of the
machine and to satisfy any request for spare parts supply
or technical assistance.
The Maintenance Technician must carefully read and
observe the safety warnings contained in this manual to
ensure that installation, start-up, use and maintenance
operations are performed in complete safety.
The Maintenance Technician is responsible for keeping or
giving the keys to access internal parts of the machine to
another operator (Supply operator), and is the sole
responsible for any servicing procedure.
This manual is an essential part supplied with the machine
and should always be available for reference before any
operation on the machine.
2.2 Description and Intended Use
This machine is automatically used to brew:
• coffee and espresso coffee using instantly ground coffee
beans;
• hot water to prepare beverages;
• milk-based beverages using the Cappuccinatore supplied.
The elegant machine housing has been designed for use in
small offices, businesses and institutions.
Using the machine for any other purpose is considered
dangerous and as a misuse.
Misuse voids all forms of
warranty, releasing the
Manufacturer from any
responsibility for damage
to property and/or
personal injury.
The following are also
considered misuse:
• any use other than the intended use and/or employing
methods other than those described in this manual;
• any operation on the machine in breach of the instructions
provided in this manual;
• any tampering with parts and/or safety devices not
previously authorised by the Manufacturer and performed
by unauthorised personnel;
• machine installation in an outdoor environment.
In such cases the customer will be charged with the
machine repair cost.
To Next Page
Loading...
Need help?
General
