US English
7
36
7.8 Coffee Grind Adjustment
Do not pour ground
and/or instant coffee into
the coffee bean hopper.
Do not put any material
other than coffee beans
into the hopper.
The coffee grinder contains
moving parts that may be
dangerous. Do not insert
fingers and/or other
objects.
Turn off the machine by
pressing the ON/OFF
button and remove the
plug from the socket
before carrying out any
type of operation inside
the coffee bean hopper.
The machine allows the coffee grind to be slightly adjusted
in order to adapt it to the kind of coffee used. For any
adjustments, use the lever located on the inner side of the
service compartment.
Turn the lever by only one notch at a time during the
grinding phase. Brew 2-3 cups of coffee to verify changes
in grind. The reference marks indicate the grind setting.
There are different grind settings to choose from with the
following references:
1 - Fine grind
2 - Coarse grind
7.9 Adjusting the "Aroma" -
Amount of Ground Coffee
The machine allows you to program the amount of coffee
to be ground for preparing each cup of coffee.
The Aroma adjusting lever
must only be turned when
the coffee grinder is
stopped. The adjustment
must be performed before
brewing coffee.
DO NOT change the
coffee dose if the
pre-grinding option is
active (set on “ON”).
For any adjustments, use the lever located on the inner
side of the service compartment.
Open the service compartment door with the appropriate
key.
To Next Page
Loading...
Need help?
General
