Installing Harness System
55 56
continued on next page
1
2
3
4
5
6
Insert Buckle’s Metal
Retainer into Slot
Closest to Child
Buckle must face out.
Rear-Facing Mode:
You must use the 1st or
2nd buckle slots.
Forward-Facing Mode:
Any slot can be used.
Thread Harness Strap
With sewn end of harness strap
loop facing the buckle, thread
harness strap down through hip
harness slot.
Pull Harness Strap
Across Bottom of Shell
Push harness strap up through other
hip harness slot.
Do not twist harness strap.
Make Harness Strap Even
Sewn ends of harness strap loops
must face each other when you hold
them up.
Pull Metal Retainer
Completely Through
Pad and Shell
Check Buckle
Pull up on buckle to make sure
it is secured.
The buckle must not pull out.
To Next Page
