9
Attach Seat Pad
Fasteners
Wrap loose end of seat
pad around front bottom
of backless booster.
Attach both fasteners
& both elastic straps
as shown.
FINISHED!
The car seat has now been
converted to Backless Booster
Seat Mode.
See pages 47-50 for Backless
Booster Seat Use in Vehicle.
See Booster Seat Child Fit, page 38.
46
To convert to one of the backed modes, for
use in Forward-Facing & Rear-Facing
harnessed modes or Backed Booster
mode, see page 36, step 13.
To reinstall buckle, see pages 53-54.
To change headrest/harness height, see
pages 51-52.
To install seat pad set, see pages 63-64.
To remove/store Shoulder Belt-Positioning Clip, see page
45, steps 7 & 8.
To Next Page
Loading...
