3
Accessory Use
Removable Cup Holder(s)
(on select models)
For Use in All Modes
The cup holder(s) is top-rack
dishwasher safe.
To attach, push the cup
holder post into the end of the
armrest, firmly, until you feel a
click. Pull out gently to make sure it is secure. Repeat for other side.
To remove, pull out on the cup holder.
Head Pillow & Body
Pillow
(on select models)
Only For Use in
Rear-Facing Mode
The head and body pillows
MUST be used together.
To remove head pillow, from the back of the head pillow gently pull
the fabric tabs out of the seams in the headrest fabric.
To attach head pillow, slide the fabric tabs into the slots in the seams
of the headrest fabric seams.
To remove body pillow,
undo the buckle & then pull it
through the slot in the pillow.
Pull pillow off of seat.
To attach body pillow, feed
buckle into matching buckle
slot in pad.
To Next Page
Loading...
