Sagem MYX-2 - Configuring WAP Parameters

33
WAP
Advanced…: offers the following advanced settings
- Configuring parameters
- Show URL
- Logoff
- Circuit message (if user can confirm each logon)
- Security (is used to access information on making WAP connections
secure).
About…: information on the browser.
Exit: returns to the telephone's home page.
Select the Advanced… menu, then the configuration menu.
Choose from the sub-menus offered:
Logon parameters is used to select or modify your access provider's logon
parameters or configure the parameters of other access providers.
The active access service is preceded with a start.
Configuration of WAP parameters:
All information to be entered in the parameters are provided by your
operator or access provider.
- Choose desired access service, then press Choice .
- Enter title of service and accept.
- Enter Internet address of home page and accept.
The GSM parameters to be entered are:
- User name
- Password
- IP address of WAP gateway
- Port type (secure or insecure)
- Call number
- Access mode (digital, analogue or automatic)
In automatic mode access can be gained to the operator's network by a digital
link and by an analogue link to a different network (in roaming).
Configuring WAP parameters
My-X2 English.book Page 33 Lundi, 26. mai 2003 10:45 10