Sagem Optus RL302 - Reference and Troubleshooting; Call Feature Codes Table

Call Features Operation using handset
1
Call Hold (single party) ^
Press R key, Hold or re-activate call
2
Call Waiting activate
Dial *43# to activate
3
Call Waiting de-activate
Dial #43# to de-activate
4
Reject a Call Waiting ^
Press R followed by 0 key when call waiting beeps
are heard
5
Accept a Call Waiting ^
Press R key when call waiting beeps are heard
6
Alternate between held and active call ^
Press R key
7
End Active Call ^
Press R followed by 0 key when call waiting beeps
are heard
8
Call Forwarding Unconditional
Dial *78* followed by a destination phone number
including area code # confirmation tone
9
Call Forwarding on Busy
Dial *76* followed by a destination phone number
including area code # confirmation tone
10
Call Forwarding on No Reply
Dial *77* followed by a destination phone number
including area code then # confirmation tone
11
Call Forwarding Unconditional to VoiceMail
Dial *78* followed by 321# confirmation tone
12
Call Forwarding on Busy to VoiceMail
Dial *76* followed by 321# confirmation tone
13
Call Forwarding on No Reply to VoiceMail
Dial *77* followed by 321# confirmation tone
14
De-Activate all Call Forward
Dial #22# confirmation tone
15
VoiceMail access
Dial *96#
16
Caller ID block per call
Dial 1831 followed by destination phone number
including area code then #
17
Caller ID send per call
Dial 1832 followed by destination phone number
including area code then #
Quick Reference Table - Call Feature Codes for the Voice Box
^Note: You cannot use the Call Waiting feature if your handset does not have a RECALL button. The
RECALL button may be labelled with R, F or FLASH. For Optus handsets or compatible handsets with
a Call Waiting button, the Call Waiting button can be used instead of RECALL.