DSI86 HD freesat
14
Connection to the VCR/DVD recorder
See the diagram below to connect your receiver to a VCR/DVD recorder.
Connection to a home cinema amplifier
Some digital channels are shown in DTS or DOLBY DIGITAL quality sound. To fully enjoy this sound
quality, it is best to connect your receiver to a home cinema with a coaxial input.
Use a coaxial cable (not supplied) to connect the DIGITAL AUDIO output on the receiver to the input of
your home cinema amplifier.
Note
If your VCR/DVD recorder has more than one Scart connector, choose the TV
or EXT1 socket.
UG 253442997-C DSI86 HD Freesat UK.book Page 14 Jeudi, 13. octobre 2011 10:30 10
To Next Page
Loading...
Need help?
General
