Sagemcom F@st 5260
Chapter 4:
Administration
Restore Factory Defaults
There are two ways to restore factory defaults:
•
Through the web GUI
•
Using the reset button on the router
Restoring Factory Defaults will erase customized router settings.
Ensure that you backup customized settings before continuing.
From the Web GUI:
1.
Log in to the web GUI.
2.
Click on Router Settings.
3.
Select the Maintenance tab, then Backup & Restore.
4.
Click on Choose File, then browse to the file containing the factory settings.
5.
Select the file, the click on Restore Configuration.
From the Router:
1.
Locate the reset button on the left side panel of the router.
2.
Press and hold the button for 15 seconds or more for factory reset.
•
The Power indicator light on the right-hand side of the front of the router will turn off to
indicate that the factory reset function is being performed.
•
The router will then reboot to complete the factory reset.
44
To Next Page
Loading...
