11
4
1
1
PHONE INSTALLATION
CONNECTING THE BASE
Never force the plugs: they are in different shapes to
avoid connection mistakes.
1. On the underside of the base, click the phone jack into
its socket and connect the other end of the cord to the
telephone wall outlet.
2. Connect the end of the power supply cord on the
underside of the base and connect the power adapter
to the mains socket. The phone display is turned on.
3. An information screen presents the current language
used.
4. Select the language using
and keys.
5. Press Valid..
6. An information screen asks you to choose the country
where you will use your telephone.
7. Select the country using
and keys. Press
Valid..
SETTING UP THE HANDSET
The batteries are already inserted in the handset. To put
the handset into use, simply remove the tab by pulling on
it firmly in the direction of the arrow.
The handset emits a double beep to indicate that it has
started and then a second beep to indicate that the
handset is synchronized with the base. From then on,
your handset becomes operative and you can use it to
make calls.
You can now use your telephone to make and receive
calls.
Before making any connections, please
refer to the safety instructions presented
at the beginning of this user guide.
Power socket
Telephone socket
If you have made a mistake while
choosing the language or the country, you
have the possibility to change them later.
In order to modify the language or the
country, refer to paragraph "Modifying the
language", page 23. In order to modify the
country, refer to paragraph "Modifying the
country", page 27
On leaving the factory, the handset is
already registered in the base.
If your handset is not recognized by the
base, then launch a manual registration
(See paragraph "Set the base to
registration mode", page 25.
To Next Page
Loading...
Need help?
General
