25
4
2
5
ADVANCED SETTINGS
Base settings
Set the base to registration mode
Using this function you can add GAP compatible
hnadsets to your base. The handset that you want to pair
with your base must itself be in pair mode. Consult the
user booklet of your handset to find out what to do.
•Go to SETTINGS / ADVANCED SET. / SET BASE /
REGISTR. MODE.
•Press Valid..
• REGISTR. MODE? is displayed on the screen,
press Yes.
• Indicator on the the top of the '1' key starts to flash
rapidly. Your base will remain in registration mode for
about 1 minute.
Resetting the base
When you reset your base, all the base parameters are
reset to their initial values (factory settings).
•Go to SETTINGS / ADVANCED SET. / SET BASE /
RESET BASE.
•Press Valid..
• REINIT. BASE? is displayed on the screen.
•Press Yes.
• Enter the base code.
•Press Valid..
The "RE-INIT. IN PROCESS" and the OK messages
are displayed successively.
Your base is now reset.
De-registering a handset
•Go to SETTINGS / ADVANCED SET. / SET BASE /
DELETE HANDSET.
•Press Valid..
• Select the handset you wish to unregister
using or . Press Valid..
• A screen prompts you to confirm the unregistration.
Press Yes to unregister the handset.
The handset is no longer registered to the base.
You can save up to 5 GAP-compatible
handsets on your SIXTY base.
You can also set the base to pairing mode
by holding down your base's key.
Après la réinitialisation de votre
téléphone, il faut le débrancher
électriquement et puis le rebrancher afin
de retrouver les paramètres de
configuration usine.
To Next Page
Loading...
