26
4
2
6
Line settings
Modifying the dialling mode
The type of dialling generally used is voice frequency.
It is possible that the exchange to which you are
connected uses pulse dialling.
•Go to SETTINGS / ADVANCED SET. / SET LINE /
DIAL.
•Press Valid..
• A screen displays the current status.
- To keep the status, press Valid..
- To modify the status, press or . The status is
modified on the screen.
•Press Valid.. OK is displayed on the screen.
•Press Return to go back to the previous menu.
Modifying the flash duration
If you connect your telephone to a private automatic
branch exchange or use it in a foreign country, you may
need to modify the flash duration in order to use your
telephone correctly with regard to the following
functionalities: outgoing 2nd call, incoming 2nd call, 3 way
calling.
Contact your service provider to obtain the correct flash
duration and then modify it by doing the following.
•Go to SETTINGS / ADVANCED SET. / SET LINE /
FLASHING.
•Press Valid..
• An information screen presents the current flash
duration.
- To keep the duration, press Valid..
- To modify the duration, press or .
• Select the new duration.
•Press Valid.. OK is displayed on the screen.
•Press Return to go back to the previous menu.
Before changing the settings of the
telephone line, contact your operator to
obtain the parameters for your line.
The default dialling mode is tone.
To Next Page
Loading...
Need help?
General
